Top 5 best hardtail mountain bike for cyclists can buy right now

Top 5 best hardtail mountain bike for cyclists can buy right now.

This article concludes the top 5 best hardtail mountain bike for cyclists can buy right now.

Usually no rear suspension, frame as one of the shape of the mountain bike called hardtail mountain bike.

Hardtail mountain bikes have a rigid frame and are usually equipped with suspension-proof front forks, meaning that the front end of the bike can absorb some vertical bumps and larger suspensions.

Because the hardtail mountain bike has no rear suspension, nor does it have any rear connecting rod or pivot, its weight is always lighter than the full suspension mountain bike under the same conditions.

This means that the hardtail mountain bike can attack the slope more easily, and the maintenance is much less. What’s the difference between hardtail vs. full suspension mountain bike?

Table of Contents
    Add a header to begin generating the table of contents

    Top 5 best hardtail mountain bike for cyclists can buy in 2023

    Here are the top 5 best hardtail mountain bike for cyclists can buy right now in 2023:

    • Yeti ARC T4
    • Chromag Rootdown Ti
    • Sage Flow Motion
    • Starling Roost
    • Mondraker Podium RR SL

    Yeti ARC T4

    The legendary ARC hardtail mountain bike was born in 1991 and developed its softtail sibling.

    The ARC endured until 2016, when Yeti put all its resources into the development of the Switch Link (Switch Infinity) suspension system, suspending the ARC lineup for this reason.

    The legend was reborn in 2020, and ARC has been the dream of many bike lovers.

    Yeti ARC T4-1

    EST. $8,400
    Frame TURQ series carbon fiber frame
    Fork Fox Factory 34 FIT4/130MM
    Brakes SRAM Level Ultimate
    BB SRAM Dub BB92
    Weight 24.63 lbs

    The ARC was once the dream of many cyclists, and now Yeti has revived it.

    The Yeti ARC uses a 29er wheelset and a 130mm travel fork, and the frame is built with Yeti’s latest carbon fiber technology and backed by a lifetime warranty.

    The new ARC builds on Yeti’s mountain bike knowledge and is in line with the latest trends, allowing ARC to retain its heritage while offering a new generation of riding experience.

    The Yeti ARC utilizes modern mountain bike geometry, with a gentle head tube angle of only 67° for stable downhill handling, and a seat tube angle of 76° for an efficient climbing position.

    Yeti ARC T4-2

    A long reach with a short 50mm handlebar, 130mm Fox 34 fork, and a raised seatpost make the ARC the “beast” of a hardtail mountain bike.

    ARC offers the top-of-the-line TURQ series and the lower-priced C series.

    The main difference between the two is the carbon fiber bike material, with the TURQ using high modulus carbon fiber and the best manufacturing process to improve the stiffness to weight ratio, while the C series balances cost and weight for a cheaper price.

    Chromag Rootdown Ti

    The Rootdown Ti takes the tried and tested geometry of the Rootdown and pairs it with the almost magical properties of Titanium.

    With an incredibly high strength to weight ratio, a silky, paint-less finish and our custom CNC’d dropouts, yoke, and braces, the Rootdown Ti is an elegant beauty that is ready for the rough stuff.

    Chromag Rootdown Ti-1

    EST. $3,600
    Frame Titanium
    Hub spacing Boost 148mm (Axle and Hanger Included)
    BB 92mm Press Fit (PF92)
    Fork Rock Shox Lyrik Select+ 160mm
    Brakes SRAM G2 RSC

    Its ductility means we can create an incredibly light frame, but still maintain compliance and quality ride feel that Chromag are known for.

    It’s also extremely resistant to corrosion, so we can show off its clean, consistent welds and natural brilliance!

    It features an extra robust heavy-gauge front triangle and a massive 51mm downtube, yet at 4.65 lbs (med), it still saves 2 lbs over its steel counterpart.

    Chromag Rootdown Ti-2

    Sage Flow Motion

    Unburdened by the complexity of pivots, the Flow Motion is light and snappy. Launch doubles with stability thanks to the extended reach and internal dropper post routing.

    Send it with the confidence, knowing that you will be landing on the strongest USA Made 3/2.5 titanium tubing.

    Sage Flow Motion-1

    EST. $8,900
    Frame Titanium
    Hub Industry 9 Boost
    Fork Fox Factory 36 150mm Travel
    Brakes Shimano Deore XT
    Weight 27.5 lbs

    At Sage, 3/2.5 titanium is the magic material. The smooth riding alloy blends stiffness, durability and weight for the ultimate frame tubing.

    Titanium has a superior strength-to-weight ratio compared with steel and aluminum, and the fatigue tolerance far surpasses the other bike frame materials.

    Don’t fret long rain rides or brackish water crossings – 3/2.5 titanium resists rust and corrosion better than any other metal tubing.

    Designed around a 29×2.4 tire – The tire sizes can vary. Actual tire measurement based on tire and rim combination of 60mm from knob to knob measurement with tire installed and fully inflated on rim.

    Sage Flow Motion-2

    Starling Roost

    Starling Roost is a sleek, fun, hardcore hardtail mountain bike.

    The frame is crafted out of slender stainless steel tubing and the geometry has been designed around an MX wheel configuration.

    So you benefit from the additional roll over of a 29in wheel up front, combined with a stronger 27.5in wheel and shorter stays out back.

    Starling Roost-1

    EST. $1,539
    Fork 120mm - 160mm
    BB 73mm threaded

    A handbuilt, zingy steel frame makes light work of rough and rowdy descents whilst mullet wheels bring that perfect balance of flick-knife and magnum.

    With room for a 120mm to 160mm fork you’ve got plenty of options to custom-build your own perfect setup.

    It’s not a spindly XC whippet. It’s a ride-wherever, ride-whatever, tough-as-nails stainless do-it-all that’ built to take on whatever you can throw it at.

    And, of course, it’s built with beautiful stainless steel for that shiny, rust-free raw style.

    Starling’s frame is designed around the 148x12mm standard. Maybe that sounds like a bit of bodge on a $1,539 frame, but most riders will run a standard 148mm boost hub so it’s not a big deal.

    Starling Roost-2

    Mondraker Podium RR SL

    At well under 1000 grams, the PODIUM CARBON RR SL has one of the lightest hardtail frames currently on the market.

    It’s a perfect hardtail mountain bike for cyclists who try to practice more and conquer every terrain.

    Mondraker Podium RR SL-1

    EST. $11,993
    Frame Carbon
    Hub Mavic, Boost 12x148mm
    Fork Rockshox SID SL Ultimate RL 29, 100mm
    Weight 8.6 KG

    The minimalist design and the high modulus carbon stealth carbon structure make the frame light and rigid.

    As for the geometries, compared to the previous model, important changes have been made such as a more open header angle of 68.5°, a more vertical seat tube angle of 74.5° and a shorter rear triangle that measures 430 mm.

    It’s simply a XC weapon. It is, without a doubt, the most effective and lightest hardtail mountain bike that suit most of the cyclists with its high performance.

    Mondraker Podium RR SL-2


    Above are top 5 best hardtail mountain bike for cyclists can buy right now, what other models do you recommend?

    Related posts

    SAMEBIKE electric bike blog, where you will find all articles about cycling tips, as well as some reviews and newsletters about e-bikes.



    Video Gallery
    Contact Form Demo
    Scroll to Top


    Complete control over product allows usto ensure our customers receive the bestquality prices and service. We take greatpride in everything that we do.